|
FRIGI-TECH
Performance Enhancing Refrigerant Additive
|
BENEFITS
|
|
| •
Increases Heat Transfer in the Condensor |
Up to 25% |
| •
Increases Thermal Transfer in the Evaporator |
Up to 25% |
|
• Reduces Energy Consumption
|
Due to the increased heat and thermal
transfer |
| •
Extends Equipment Life |
Lower operating oil temperatures |
|
• Reduces Ongoing Maintenance Costs
|
Increased lubricity |
| •
Reduces Peak Demand on Power Usage |
Increased lubricity |
| • Reduces
Compressor Cycle Time |
Satisfies demand quicker
|
| •
Reduces Friction Noise and Vibration |
Increased lubricity |
| •
Helps Prevent Bearing Damage |
Increased lubricity |
| •
Lowers Oil Operating Temperature |
Increased lubricity |
| •
Softens and Conditions Seals |
|
| •
Improves Overall Operation |
|
| •
Improves Compressor Performance |
|
| •
Cleans and Restores Older Systems |
|
How Frigi-Tech
Works
Diagram Above: Condensor and Evaporator Coils
Frigi-Tech increases the efficiency in the condenser
and evaporator coils, thereby increasing heat transfer and thermal transfer
respectively. Frigi-Tech's™ polarized molecule bonds to the
metal inside the system, removing the insulative buildup of oil, and forming
a conductive protective layer that also increases heat transfer surface
area. With Frigi-Tech, oil returns to the reservoir and no longer
builds up on heat transfer surfaces.
Frigi-Tech is a one-time treatment. The only time additional
Frigi-Tech is required is if and when a compressor is
replaced or an oil change on a chiller. Then only 10% of the original treatment
is required.
Summary of Frigi-Tech
The Six Ways Frigi-Tech Saves Money:
1. Increases Heat Transfer in the Condenser (Up to 25%)
2. Increases Thermal Transfer in the Evaporator (Up to 25%)
3. Decreases Compressor Amp Draw 1
4. Increases Lubricity
• Lowers Operating Oil Temperature 7%
to 10%
• Extends Life of Equipment
• Reduces Ongoing Maintenance
5. Decreases Peak Demand Electrical Consumption Costs
• Increased Lubricity
6. Provides Corrosion and Oxidation Protection
• Extends Life of Equipment
Note:
1. Usually 3% to 7%; Some compressors with additives in oil will not see
the Amp reduction
Legal Notice
|
