TriMax®
Strategic Lubrication for The 21st Century

A high performance, molecular bonding, metal conditioning lubrication additive that imparts extraordinary capabilities to any lubricant in which it is added.

The Product TriMax® is a specially formulated combination of synthetic petroleum and state of the art synthetic anti-friction and corrosion protection compounds. This scientific blending produces a product which is heat, mechanic and shear stable and oil soluble. TriMax® is compatible with all petroleum and synthetic oils, gear oils, transmission and hydraulic fluids.

While many other additive products make claim to contain no Teflon®, graphite or molybdenum, TriMax® outstrips all of those. In addition to being free of any of these contaminants, it is not formulated with sulfur, phosphorous or any solvents.

TriMax® is a high performance, molecularly bonding metal conditioning additive package that imparts extraordinary capabilities to any lubricant in which it is used. ASTM testing validates virtually any requirement of industry and the private sector.

For industrialists looking to preserve machinery, reduce operating costs, reduce downtime to the PM schedule, and increase productionÉthe answer is TriMax®. Design tolerances are not altered nor are seals, gaskets or plugs affected. Power transmission equipment can effectively operate at both high and low temperature extremes.

TriMax® excels in contaminated environments as it allows equipment to continue to function in spite of contamination by water, solvents or solid particles. This will significantly reduce the risk of catastrophic failure. It enhances survivability of essential equipment even when there is a loss of the primary lubricant. This is a function of the extraordinary ability of TriMax® to retain the oil film on metal surfaces. As a result, the film strength of the lubricant package far exceeds primary lubricant specification. Lubricant drip-down time increases from a nominal 4 hours to over a year. This eliminates dry start-up damageÉthe primary cause of pre-mature wear and engine failure.

TriMax® does not contain Teflon®, graphite, sulfur, phosphorus, molybdenum or any solvents!

Environmentally Sound ISO-9000 Responsive
This remarkable product was formulated with the ISO-9000 aware, environment-conscious, maintenance oriented industrialist in mind. Spectrographic testing will show that this vanguard formula is the lubricant package of choice. Industrial waste oil disposal will not be contaminated by sulfur, phosphorous or fluoride-laden compounds.

No Serious Health Risks
No Safety Hazards
No Special Disposal Requirements (dispose as any oil product)

MSDS Available Upon Request.

Use TriMax® with complete confidence in Lubricating Oil and Hydraulic Fluids to obtain superior lubrication.

Directions For Use
Gear Boxes and Sealed Units: Add 2 ounces per quart at every oil change. Do not exceed sump limits.

Air Compressors: Add 2 ounces per quart at every oil change. Hydraulic Systems: Add 8 ounces per 5 gallons of fluid every 1000 operating hours.

Metal Working Applications: Apply a thin film directly to materials for threading, drilling, tapping, drawing, milling or stamping or blend at 10% with normal oil based cutting fluids.

Shop Use: Excellent full strength lubrication for air tools, valves, chains, conveyors, all high speed shafts, electric motor bearings and blowers.

Assembly Lube: Apply thin film to crankshaft mains and piston rod end journal surfaces, cam lobes and lifter feet.

Performance
The typical performance of TriMax® is shown in the chart below.

When TriMax® is added to an pneumatic air compressor's oil, the volume of compressed air per unit of time, at a given pressure, increases at an average 20%. This increased compressor performance capacity results in a faster recovery time to the operating cut-off pressure.

When performance increases, the benefit can be utilized in either an increase in output capacity, or a decrease in the energy cost to produce compressed air at the same capacity. The values in the chart are for an actual field test where the recovery time to fill the compressorŐs receiver tank from 90 psi to the pre-set 150 psi cut-off pressure, decreased from 90 seconds before was added, to 72 seconds after the addition of TriMax®.

Applications
• Pneumatic Air Compressors
• Diesel Emergency Generators
• Gear Boxes
• Hydraulic Systems
• Slurry Gear Boxes
• Truck and Automotive Engines
• Truck and Automotive Transmission
• Truck and Automotive Differentials
• Assembly Line Equipment
• Metal Shop Equipment

ANY application where a lubricant is used and there is metal-to-metal contact TriMax® has been proven to increase truck and auto gas mileage between 15 to 20% due to the products ability to virtually eliminate light-to-metal contact.

Treating emergency diesel engines with TriMax® stops dry start up therefore prolonging the generators diesel engine life. Preventive maintenance as well as equipment breakdowns are reduced with TriMax®. It is inexpensive and once used becomes invaluable to industry.

TriMax® in gas or diesel vehicles of private vehicle owners and fleet garage managers now have the ability to drastically reduce wear on engines and drive trains (reducing trips to the service garage), improve fuel mileage and lessen exhaust emissions. Oil analysis will clearly indicate that lubricant life is being extended.

Year-After-Year
• Like-new engine performance
• Outstanding wear protection
• Preclude dry start-up damage
• Faster cold-weather starts
• High temperature protection
• Reduced exhaust emissions
• Better fuel economy
• Preclude water damage
• Smoother gear operation
• Extended life of primary lubricant
• Reduces operating temperatures

Product Warranty
The manufacturer warrants that its TriMax® lubricant contains no harmful ingredients that might damage metal, seals or gasket materials and will not cause material damage to any mechanically sound equipment when used in compliance with the company's recommendations and instructions.

Equipment manufacturer's maintenance criteria are to be followed as per the maintenance manual.

TriMax® will positively affect bottom line expenditures shortly after initial application.

Managers can prolong equipment life, reduce down time and help protect against catastrophic failure. It will reduce expenditures for capital equipment and reduce energy costs.

Legal Notice